V-Ring type A
Profile A is the most common and available for shaft diameters from 3 to 1000 mm. The Trelleborg V-ring® is an all-rubber seal for rotary shafts, rotating with the shaft and sealing axially against the stationary counterface. Its light lip pressure generates low friction. It can also be used as a secondary seal to protect primary seals that do not perform well in hostile environments.
Size Range:
4 mm to 500 mm
Temperature:
-40 °C to 200 °C
Speed (max):
12 m/s
Material Information for the product(s) on this page
N6T50
Basic Material:
NBR
Colour:
Black
Commercial Description:
The properties of the nitrile rubber depend mainly on the ACN content which ranges between 18 % and 50 %. In general it has good mechanical properties with an operating temperature range of between -30 °C and +100 °C (for a short period of time up to +120 °C). NBR is mostly used with mineral based oils and greases and is a good choice for standard applications.
Hardness:
60 (Shore A)
VDT50
Colour:
Black
Commercial Description:
FKM is an elastomer material known especially for its non-flammability, low gas permeability and excellent resistance to ozone, weathering, and aging. The operating temperatures of the fluorocarbon rubber range between -20 °C and +200 °C (for a short period of time up to +230 °C). FKM is also often used with mineral based oils and greases at high temperatures.
Basic Material:
FKM
Hardness:
65 (Shore A)
| Product No. | Material Type | For shaft diameter, d1 | Minimum, d3 | Fitted width, B1 | Add to Enquiry | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Product No.TWVA01600-VDT50 | Material Type FKM | For shaft diameter, d<sub>1</sub> 155 - 165 | Minimum, d<sub>3</sub> d1 + 24 | Fitted width, B<sub>1</sub> 12.0 ±1.8 | ||||||
| Product No.TWVA01800-VDT50 | Material Type FKM | For shaft diameter, d<sub>1</sub> 175 - 185 | Minimum, d<sub>3</sub> d1 + 24 | Fitted width, B<sub>1</sub> 12.0 ±1.8 | ||||||
| Product No.TWVA02750-VDT50 | Material Type FKM | For shaft diameter, d<sub>1</sub> 265 - 290 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA03000-VDT50 | Material Type FKM | For shaft diameter, d<sub>1</sub> 290 - 310 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA03250-VDT50 | Material Type FKM | For shaft diameter, d<sub>1</sub> 310 - 335 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA03500-VDT50 | Material Type FKM | For shaft diameter, d<sub>1</sub> 335 - 365 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA04000-VDT50 | Material Type FKM | For shaft diameter, d<sub>1</sub> 390 - 430 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA04500-N6T50 | Material Type NBR | For shaft diameter, d<sub>1</sub> 430 - 480 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA05000-N6T50 | Material Type NBR | For shaft diameter, d<sub>1</sub> 480 - 530 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA05000-VDT50 | Material Type FKM | For shaft diameter, d<sub>1</sub> 480 - 530 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA05500-N6T50 | Material Type NBR | For shaft diameter, d<sub>1</sub> 530 - 580 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA05500-VDT50 | Material Type FKM | For shaft diameter, d<sub>1</sub> 530 - 580 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA06000-N6T50 | Material Type NBR | For shaft diameter, d<sub>1</sub> 580 - 630 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA06000-VDT50 | Material Type FKM | For shaft diameter, d<sub>1</sub> 580 - 630 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA06500-N6T50 | Material Type NBR | For shaft diameter, d<sub>1</sub> 630 - 665 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA07000-N6T50 | Material Type NBR | For shaft diameter, d<sub>1</sub> 665 - 705 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA07250-N6T50 | Material Type NBR | For shaft diameter, d<sub>1</sub> 705 - 745 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA07500-N6T50 | Material Type NBR | For shaft diameter, d<sub>1</sub> 745 - 785 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA08000-N6T50 | Material Type NBR | For shaft diameter, d<sub>1</sub> 785 - 830 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA08500-N6T50 | Material Type NBR | For shaft diameter, d<sub>1</sub> 830 - 875 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA09000-N6T50 | Material Type NBR | For shaft diameter, d<sub>1</sub> 875 - 920 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA09500-N6T50 | Material Type NBR | For shaft diameter, d<sub>1</sub> 920 - 965 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVAX1000-N6T50 | Material Type NBR | For shaft diameter, d<sub>1</sub> 965 - 1015 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA02000-VDT50 | Material Type FKM | For shaft diameter, d<sub>1</sub> 190 - 210 | Minimum, d<sub>3</sub> d1 + 45 | Fitted width, B<sub>1</sub> 20.0 ±4.0 | ||||||
| Product No.TWVA00040-N6T50 | Material Type NBR | For shaft diameter, d<sub>1</sub> 3.5 - 4.5 | Minimum, d<sub>3</sub> d1 + 6 | Fitted width, B<sub>1</sub> 3.0 ±0.4 | ||||||