Turcon® Double Delta® - RDD000060-T46V
Turcon® Double Delta® is a rubber energised plastic faced seal. The seal is designed to expand and improve the service parameters of O-Rings and is installed in existing O-Ring grooves.
Quality & Norms:
Correspond to recommendation of ISO 3320 yes
O-Ring:
O-Ring Size 5.60 x 1.80 mm
O-Ring TSS Article No. ORAR00010
Material Properties:
Material Type PTFE/FKM
Installation Dimensions:
Rod Diameter, dN h9 6 mm
Groove Diameter, D1 H9 8.9 mm
Groove Width, L1 +0,2 2.4 mm
Seal Capabilities:
Min. Temperature -10 °C
Max. Temperature 200 °C
Speed max. 15 m/s
Pressure max. 35 MPa
Material Information for the product(s) on this page
T46V
Basic Material:
PTFE/FKM
Filler:
Virgin PTFE compounded with Turcon® and bronze
Commercial Description:
Turcon® T46 is used as a primary sealing material along with an FKM (V7) elastomer. Turcon® T46 is a blend of PTFE, bronze, and a proprietary Turcon® filler and is backed by years of time-tested performance and offers a balance of performance and cost. This material has a high extrusion resistance and has very good wear properties. An FKM elastomer is used, made of a heat-resistant material, allowing for use at high temperatures.